Pfister 9501650 Quad Ring for Pfister Kitchen 34 Series

what our customer say this product:

Powered by

1. G. V. Verified Buyer – 17 December 2024

   Fit my faucet like the old parts. Stopped the water leak from the pivot of the spout .
   

2. Michael Thomas Verified Buyer – 14 February 2025

   This is exactly the part needed to stop the leak. Just to note this is a 2 pack 1 for the top and 1 for the bottom.
   

3. OBX Verified Buyer – 21 February 2025

   This order took a while to receive, but I did get it and it is working just fine. We can thank the Coronavirus for the delay I’m sure. My faucet leak is repaired and all is well with the world.
   

4. Phil Koser Verified Buyer – 4 March 2025

   Leak stopped after easy installment.
   

5. jerlic Verified Buyer – 18 March 2025

   Are you looking for square rubber O rings to fix your single-handle Pfister kitchen faucet? Does your original manual say “950-165” NOT “950-1650”? These will be too small, despite being sent here to buy these when searching for a replacement part. They are about 1 1/4” outer diameter and 1 1/8” inner diameter. The part that fit was the slightly larger 950-910 rings here on pfisteroutlet.com. Hope this helps someone! Two of those other Pfister rings and a new cartridge, and my 15-year-old kitchen faucet is working like new.
   

6. Ben Verified Buyer – 27 March 2025

   These did not fit my Brookwood 34 series faucet circa approximately 2006. According to the manual, this faucet requires 950-165 O rings. I was directed to 950-1650 but these were too small to fit my faucet, and when installed the faucet leaked rapidly.
   

7. Anonymous Verified Buyer – 4 April 2025

   I took the faucet apart to clean it and ended up replacing the 2 Quad Ring seals because they had hardened and were brittle and were leaking once put back together.
   The Quad Ring seals were OEM and two came in the package. Once installed the faucet did not leak.
   Be careful not to roll the seals when installing they need to be installed as received.
   Tip: Remove the top seal last and install it first. Silicone grease helps with the installation.
   

8. Jim Verified Buyer – 14 May 2025

   See above
   

9. diskdevil Verified Buyer – 10 June 2025

   Everything was perfect. Thank you 🙂