Pfister 9745319 General Valve Cartridge Sub Assembly, Unfinished

what our customer say this product:

Powered by

1. Jess H. Verified Buyer – 9 March 2024

   Faucet handle was tough to turn and made an awful noise when you turned the water on. Google determined it was the cartridge. Couldn’t find manufacturer’s part number, but knew it was a Phister. This one looked like a fit so went with it. 5 minute install with help of my daughter to stand at water shutoff in case my plumbing skills weren’t up to snuff. Went in easy, no leaks and problem fixed. Price was comparable to big box stores, but of course with convenance of Prime.

   

2. Lynn K. Luther Verified Buyer – 12 June 2024

   Fit well, easy to install, and worked as needed.
   

3. Pablo O. Verified Buyer – 3 July 2024

   Awesome fit! Works great.. thank you
   

4. Kindle Customer Verified Buyer – 15 July 2024

   This is an upgrade valve from the original; the old one was always hard to turn.
   

5. B.W. Verified Buyer – 6 September 2024

   Bought it as is “used” from pfisteroutlet.com Warehouse. However, it was not only used one but was also a faulty one according to its indication on the box. I thought that might be just the box, and checked to find out it was indeed a faulty item. What a waste of time and cost of transportation.

   

6. Anonymous Verified Buyer – 27 January 2025

   I had replaced the original cartridge that lasted more than 18 years about 2 years ago with a cartridge made by another company (MOEN). It was much stiffer to turn the handle and lasted a little less than 2 years. It started making the pipes vibrate or shake when set at certain temperatures (the hotter the worse). Since I’ve installed this PFister cartridge, it is very easy to turn and I have no more pipe vibration or shaking. It was very easy to install and so far I am very very satisfied with this cartridge. Would definitely recommend.
   

7. Jose G. Lopez Verified Buyer – 28 January 2025

   El cartucho ensamblo perfectamente.
   

8. Mr. T Verified Buyer – 3 February 2025

   Part fit perfectly and shower worked like new after installed.
   Installation was moderate, as it required to remove and reseal knob plates.
   Quality seems to excellent
   

9. Kim Ji Ye Verified Buyer – 19 February 2025

   It’s good and inexpensive. I’m satisfied with it.

   

10. Qianti Verified Buyer – 20 February 2025

    This works on older Pfister with two piece valve. Photos are the old valve

    

11. Jesse W Verified Buyer – 5 March 2025

    Easy install, worked great replacing my two-piece cartridge 17196-0100G. I did not need to replace the handle or trim like I saw recommended.
    

12. Shins Verified Buyer – 11 March 2025

    When I googled and tried to cross reference the Pfister 974-322 cartridge number, the part number 974-0420 seemed to be the correct replacement and was deemed a universal replacement for many cartridges. However… it is about 3mm longer than the original 974-322. Hard to tell in the pic, but the Gray replacement is longer and does not seat all the way into the brass receiver block. When I first installed it, I checked for leaks and it was fine, but after a few days it started leaking around the large O-Ring at the front inside the wall.

    

13. TK Verified Buyer – 17 March 2025

    A perfect replacement for Pfister 9740420 valve. Smooth operation. No water hammering. Made in China. Fits Pfister 940004A handle, may require Pfister 970-8000 stem extension.
    

14. Makz I. Verified Buyer – 17 March 2025

    This product Pfister 9743210 was ordered as a replacement for the older model Pfister 9740420, which is still on sale. This product is as good as the old one in terms of functionality, quality is good from first sight. Fit is excellent. Movement is smooth. I noticed a very little bit less movement range for the handle with the newer model. The newer model is cheaper than the old one, so it is recommended, as it will be purchased again with the necessity.
    

15. Skylar Tamayo Verified Buyer – 19 March 2025

    100% works so easy to install I was only getting hot water and my fiance was upset for the longest I was happy with hot water but easy fix so happy I was able to do this my self 😀

    

16. MJ Miller Verified Buyer – 8 June 2025

    Product spot on. Works well. Only gave a 4 because length of time it took to receive. If you have a leak and watering dripping don’t expect a 2day or quick shipment.
    

17. Arden S Verified Buyer – 13 June 2025

    Installed this PB valve in a circa 2008 Pfister shower control and it now works better than the original. Easy installation, great fit (no leaks) and easily adjustable anti-scald plate. Adapter for older valves comes per-installed so unless you have a newer model it installs right out of the box as is.