Pfister 9740740 Avalon/Treviso 26/529 Series 25mm Cartridge Sub Assembly

what our customer say this product:

Powered by

1. Lawrence Gualtieri Verified Buyer – 23 May 2024

   Surprise surprise not in stock locally, but there it is on pfisteroutlet.com at a decent price.Quality is ok, but thats just the nature of chinese sourced products now.
   

2. Nabil Verified Buyer – 26 May 2024

   It is exact match for the cartridge I needed to replace. I did the replacement and it works perfectly.
   

3. Mr. Von Verified Buyer – 30 September 2024

   This is the perfect cartridge for my Pfister Glenfield F-529-7GF Pull-Down Kitchen Faucet (see Pic) and would have fit exactly if I used it. Should be a 5 star but it took 3 days to be delivered, and I could not be without a working kitchen sink for that long! Bought it from Ace hardware for twice the price. I attempted to return this however pfisteroutlet.com told me to keep it and still refunded my money. aaaaahhhh pfisteroutlet.com customer service is the best. Dont forget to lube it up with vaseline or plumber’s grease during installation.

   

4. Carrie Verified Buyer – 12 October 2024

   We bought and installed this cartridge. Good fit and easy to install in our 4-year old Phister faucet. Our issue was it appeared the faucet handle was too heavy for the cartridge to keep the hot water on. We had to hold the handle up with one hand and use the other to rinse dishes. This cartridge fixed the issue…for about a year and a half. The handle is beginning to fall again. So here I am again, buying another cartridge and wondering if I should try one of the other brands that claim it is made of ceramic instead of plastic alone.

   

5. Dante De Ru Verified Buyer – 4 December 2024

   Producto original y sirve para las llaves mezcladoras Pfister.
   

6. Zoran L Verified Buyer – 8 January 2025

   Correction to my rating: the valve didn’t fail, but rather a piece of rubber got stuck in it. I took it apart, added silicone grease, and replaced. Now it works as before. I bought this through Home Depot (974-074 2-1/6 in. Hot and Cold 25 mm Cartridge for 529 Series Pull Down Single-Handle Kitchen Faucets) It lasted shy over one year, as other posters mentioned. (Installed December 2020, need replacement in February 2022). It becomes loose in left-right directions and becomes really difficult to adjust warm water.

   

7. KGBelle Verified Buyer – 19 January 2025

   Worked perfect for pfister marielle kitchen single handle faucet.
   

8. Ron S. Verified Buyer – 23 January 2025

   Perfect!
   

9. Leo Verified Buyer – 25 January 2025

   Direct replacement works better than the original
   

10. Tammy Firth Verified Buyer – 28 January 2025

    great
    

11. SW CORNER Verified Buyer – 11 March 2025

    The delivery was delayed, but arrived in a reasonable time, and seller reported the delay and updated the delivery time accurately. Only one type of cartridge works for our faucet, and this was it. I don’t know how scarce it is, but, I was able to determine this was the right one for our Pfiser faucet without much difficulty on pfisteroutlet.com. Even including tax, the price was less than half what it would cost from the nearest (10+miles) plumbing supply store that carried it. The installation process was made simple by viewing YouTube videos that described it in detail. The only issues were removing the handle (it was stuck and needed to be pried off) and replacing the set-screw for the handle (pretty difficult because of its location), but these have nothing to do with the cartridge, which fit easily and does not leak.
    

12. One for All Verified Buyer – 1 May 2025

    This is exactly what I needed for my kitchen faucet that is about 10 years old (Ashfield line), model 5297YP. The parts breakdown says the cartridge is #974-074, and this is definitely the correct replacement (even though this new part has an extra 0 at the end). Also note that the color has changed from all white to black with a white bottom (as shown). The issue I had was the handle to the faucet sometimes would slowly drop down and turn on the water (at least a trickle). So I needed a new cartridge to fix the “loose” handle problem. In the photo, the old cartridge is on the left, and new one on the right. Changing this was super easy. First, make sure the water is off. The toughest part is finding the right size allen wrench (hex wrench) to remove the handle, but that is fairly easy (just put the wrench in the small hole on the handle and unscrew the screw attaching the handle to the end of the cartridge). Once the handle was off, I unscrewed by hand a cosmetic cap (in the photo see upper left round part) which exposed the locking device (brass, shown in the photo on the far right). That is removed with a large pair of pliers (just grip it “head on” on the two flat surfaces and unscrew it using pliers or pair of vice grips). Once that locking device is unscrewed, you just pull out the old cartridge and put in the new. On mine I DID need to use a screwdriver to remove the old seal (now a light blue on the new part, was red on the original part, again, see photo bottom left for the old red gasket that I had to gently scrape out of the internal workings of the faucet). Assembly is just the reverse – pop in the new cartridge (has two nipples that force the correct alignment), screw in the brass locking mechanism and tighten it (not too tight or you can damage the cartridge), screw on the outer cosmetic piece by hand, put the handle back on, use the hex wrench to tighten down the screw that holds the handle onto the cartridge, and you are done! In summary, I’m very happy! Thanks for reading 🙂

    

13. S.C. Verified Buyer – 7 May 2025

    What can go wrong with original parts. The Phiser faucet cartridge fit right in and fixed the faucet control arm from slowly closing when the faucet was On.
    

14. James M. Howard Verified Buyer – 1 June 2025

    Arrived today and installed this afternoon. Fast install and it fit our faucet. The arm on the cartridge that was in the faucet began failing to hold the handle in a fixed off position which was causing a drip issue. Seems to be fixed now. Hopefully it holds up.